https://photos.app.goo.gl/YGc9dQTsA9JEPQEq1 https://photos.app.goo.gl/DYtbUl0g1cdECI1z1Well I tried inserting photos again and no luck. Files too big. Tried to find a file editor that wouldn't fill your hard dive with cookies and crap with no avail so links is the best I can do.
I had a draft for this but somehow lost it...
Anyway. This is my cheesy creation. It is made from two wide flanges and a couple of channels plus some bed frame stock. The bed frame stock is my smoothing tool (Jim they are hard to weld because they are high carbon). It attaches with 4 pins. The two channels in the center attach with one pin each. I also have a couple of wooden angle plows that attach to the two wide flanges that I use for back filling planted rows once the seed are planted. It certainly is not pretty but it does a lot of work for the back yard farmer.
I can put as many as 4 wheel weights to make it dig deeper. That would be if you wanted to use it as a rake. Usually I use two or none.
This was a fun project because I had a need and it gave me some practice burning up rod.
The only thing I purchased for this project was the draw bar from TS and some welding rod.
Edit: trying this photo attachment...