Welcome, Guest

Author Topic: Frame assembly  (Read 1281 times)

Offline Sydney guy

  • House Bee
  • **
  • Posts: 114
Frame assembly
« on: July 03, 2020, 05:00:14 am »
Hi everyone, I'm curious to see what people are using to put their frames together. I want to buy a stapler for the air-compressor and look at making or buying a jig.
Anything that is recommended?

Sent from my MHA-L09 using Tapatalk


Offline Garigal

  • House Bee
  • **
  • Posts: 57
  • Gender: Male
Re: Frame assembly
« Reply #1 on: July 03, 2020, 05:23:36 am »
I'm doing mine the old way with nails, glue and a square, it's working well but I'm only doing 200 frames in batches of 10 a day.

The next 200 will be done with a stapler and jig lol, although the only jig I've seen for sale here is $185 dollars, it does look good though.

I bought a cheap wiring board (all metal imported) it's very rustic but gets the job done well, I'll probably try and sell it on and spend the extra $20 on one made here, they look much better.

Offline Sydney guy

  • House Bee
  • **
  • Posts: 114
Re: Frame assembly
« Reply #2 on: July 03, 2020, 05:58:36 am »
Yeah I was doing it the same way but have over a 1000 to do so need a faster way lol.

I was tempted to just start buying the cheap ones assembled and wired from Hornsby beekeeping but don't like that it's all done in China. I try to buy only Australian. I pay a bit more for my stuff but at least I know it's all Australian made or at least what I can get Australian made.

Sent from my MHA-L09 using Tapatalk


Offline Garigal

  • House Bee
  • **
  • Posts: 57
  • Gender: Male
Re: Frame assembly
« Reply #3 on: July 03, 2020, 06:12:43 am »
I've found that most of the suppliers in Sydney are selling either Chinese or NZ imported stuff so their dimensions are generally wrong or incompatible between manufacturers.

I've just bought a heap of stuff off John L. Guilfoyles in Werrington, its all made in QLD from Hoop Pine and they still use imperial measurements on all their hive components.

I'm not sure if there are multiple manufacturers up in QLD of if they're buying wholesale off Guilfoyles but it seems to be the only place in Aus where you can source locally made stuff. It's not even that much more expensive than imported.

Offline Sydney guy

  • House Bee
  • **
  • Posts: 114
Re: Frame assembly
« Reply #4 on: July 03, 2020, 07:34:53 am »
I buy my boxes and frames from David Angilley, they are in Forbes NSW. His boxes are really well made and it's all made on his family's farm.


Sent from my MHA-L09 using Tapatalk


Offline Garigal

  • House Bee
  • **
  • Posts: 57
  • Gender: Male
Re: Frame assembly
« Reply #5 on: July 03, 2020, 09:25:38 am »
They look well made.

I have just found Lockwood Beekeeping out near Bathurst, their stuff looks great and they also distribute Mann Lake products in NSW.

I don't think I can be bothered assembling and painting boxes any more so I'm going to go ready made next time. Might even go back to assembled/wired frames and just do the waxing lol.

Offline sawdstmakr

  • Global Moderator
  • Universal Bee
  • *******
  • Posts: 11497
  • Gender: Male
Re: Frame assembly
« Reply #6 on: July 03, 2020, 09:59:20 am »
I use a hive box and put wood spacers in the ends so that it holds the frames square. I stack all of the top boards together, stack the side boards and the bottom boards together using clamps. Then I put glue on them. I then put them together in the hive box with the shims I put a piece of plywood in the bottom to put pressure on the bottom boards, and staple all of the tops of the frames. I then turn the whole box over and staple the bottom boards. The staples hold the boards square  until the glue dries.
I have made up many thousands of frames using this method. It works real well.
Jim Altmiller

Offline Honeyeater

  • House Bee
  • **
  • Posts: 59
Re: Frame assembly
« Reply #7 on: July 03, 2020, 10:19:34 am »
I was tempted to just start buying the cheap ones assembled and wired from Hornsby beekeeping but don't like that it's all done in China. I try to buy only Australian. I pay a bit more for my stuff but at least I know it's all Australian made

I came across some Chinese stuff at a couple of new stores popping up selling cheap  hive ware from garages. They are rubbish. I won?t touch them especially foundation.

I only have a couple of hives so don?t have a lot of frames to put together. I also make them in batches of 10.... any more and start to fit my finger with the hammer :). I admit I enjoy making them. I made a wiring jig and that?s about it.

If you have a 1000 and make 10 a day, that?s three months. I bet you won?t stand the sight of a frame by the 8th day.

Offline Ben Framed

  • Galactic Bee
  • ******
  • Posts: 5184
  • Mississippi Zone 7
Re: Frame assembly
« Reply #8 on: July 05, 2020, 02:51:13 am »
I use a 2 in 1 air nailer/stapler. 18 gauge staples; A frame jig, and Trubond II or II glue. Both work well for frames. Love it!
For this people's heart is waxed gross, and their ears are dull of hearing, and their eyes they have closed; lest at any time they should see with their eyes and hear with their ears, and should understand with their heart, and should be converted, and I should heal them.

Offline Garigal

  • House Bee
  • **
  • Posts: 57
  • Gender: Male
Re: Frame assembly
« Reply #9 on: July 05, 2020, 08:35:59 am »
Ok well after nailing 100 frames together I'm done lol.

Going to buy a Ryobi 2 in 1 air nailer & stapler with a compressor from Bunnings for about $150 tomorrow before I assemble the next 150. And all my other equipment from now on.

What are the best size staples for frames 1"? Boxes 1 1/4"?


Offline Ben Framed

  • Galactic Bee
  • ******
  • Posts: 5184
  • Mississippi Zone 7
Re: Frame assembly
« Reply #10 on: July 05, 2020, 08:47:32 am »
Ok well after nailing 100 frames together I'm done lol.

Going to buy a Ryobi 2 in 1 air nailer & stapler with a compressor from Bunnings for about $150 tomorrow before I assemble the next 150. And all my other equipment from now on.

What are the best size staples for frames 1"? Boxes 1 1/4"?

You will love it. Be careful with it. If the staple hits a knot in the wood, the driven staple will sometimes (turn out). Make sure at all times your other hand is away from potential danger. Let us know how well you like your new set up. I like 3/4 inch for frames. Plus a touch of Tightbond  II or III glue.
For this people's heart is waxed gross, and their ears are dull of hearing, and their eyes they have closed; lest at any time they should see with their eyes and hear with their ears, and should understand with their heart, and should be converted, and I should heal them.

Offline Ben Framed

  • Galactic Bee
  • ******
  • Posts: 5184
  • Mississippi Zone 7
Re: Frame assembly
« Reply #11 on: July 05, 2020, 08:53:18 am »
I also recommend building a simple jig. At least a 10 frame one. You will be glad you did.
For this people's heart is waxed gross, and their ears are dull of hearing, and their eyes they have closed; lest at any time they should see with their eyes and hear with their ears, and should understand with their heart, and should be converted, and I should heal them.

Offline Garigal

  • House Bee
  • **
  • Posts: 57
  • Gender: Male
Re: Frame assembly
« Reply #12 on: July 05, 2020, 09:20:59 am »
I also recommend building a simple jig. At least a 10 frame one. You will be glad you did.

I'll give it a go and will watch the fingers haha, cheers.

I think ill spend a bit more and get this:

https://www.bunnings.com.au/ryobi-airwave-3-in-1-air-brad-nailer-and-stapler_p6210571

Would 50mm brad nails be enough for box construction with really good glue? Maybe a few extra screws for reinforcement?

Will probably upgrade to this too:

https://www.bunnings.com.au/selleys-460ml-aquadhere-durabond_p1232226

Offline Ben Framed

  • Galactic Bee
  • ******
  • Posts: 5184
  • Mississippi Zone 7
Re: Frame assembly
« Reply #13 on: July 05, 2020, 11:01:35 am »
>. Would 50mm brad nails be enough for box construction with really good glue? Maybe a few extra screws for reinforcement?

50mm = 2 inch Brad nails. Yes exactly what I use for box construction. I run a line of glue for sealing the edge from moisture instead of paint calk. Which serves two purposes, sealer and strength. I buy glue by the gallon. But you will be surprised at how far a gallon will go. (A long way). Maybe over kill but I shoot several brad nails along the edge of each corner. No screws, not needed, also putting a dab of glue on each nail entrance as a sealer. I am very happy with the results.
For this people's heart is waxed gross, and their ears are dull of hearing, and their eyes they have closed; lest at any time they should see with their eyes and hear with their ears, and should understand with their heart, and should be converted, and I should heal them.

Offline Ben Framed

  • Galactic Bee
  • ******
  • Posts: 5184
  • Mississippi Zone 7
Re: Frame assembly
« Reply #14 on: July 05, 2020, 12:03:17 pm »
>I think ill spend a bit more and get this:
https://www.bunnings.com.au/ryobi-airwave-3-in-1-air-brad-nailer-and-stapler_p6210571


I will give you a good laugh, I bought the cheap Harbor Freight 2 in 1 18 gage nailer/stapler for about $15.00 and can't seem to wear it out or make it jam! 
For this people's heart is waxed gross, and their ears are dull of hearing, and their eyes they have closed; lest at any time they should see with their eyes and hear with their ears, and should understand with their heart, and should be converted, and I should heal them.

Offline Ben Framed

  • Galactic Bee
  • ******
  • Posts: 5184
  • Mississippi Zone 7
Re: Frame assembly
« Reply #15 on: July 06, 2020, 08:17:48 am »
For this people's heart is waxed gross, and their ears are dull of hearing, and their eyes they have closed; lest at any time they should see with their eyes and hear with their ears, and should understand with their heart, and should be converted, and I should heal them.

Offline Garigal

  • House Bee
  • **
  • Posts: 57
  • Gender: Male
Re: Frame assembly
« Reply #16 on: July 06, 2020, 09:06:09 am »
Yeah looks like the same stuff - Polyurethane vs PVA.

Selleys is probably the goto glue in Aus, like your Titebond, although a few specialist places here stock that too.

I've also found a cheaper air nailer and a mate owes me for some work I did so I'll be using his account at the tool shop to by it and a compressor :happy:

Offline Garigal

  • House Bee
  • **
  • Posts: 57
  • Gender: Male
Re: Frame assembly
« Reply #17 on: July 11, 2020, 08:20:45 am »
Ended up getting the Ryobi 2 in 1 stapler/bradder, does up to 32mm so just for frames and lids etc, I'll keep using decking screws for my supers as they're so cheap and hold well.

Got bored after dinner so made up my own frame jig, only took me an hour and still needs some adjustments but it works quite well as is :grin:.

[ You are not allowed to view attachments ]

Offline Ralphee

  • House Bee
  • **
  • Posts: 55
  • Gender: Male
  • All the Gear, and no idea!
Re: Frame assembly
« Reply #18 on: October 09, 2020, 02:24:57 am »
Can i ask a really new-bee question here?
Why so are people building so many frames?
Are you expanding that aggressively? Selling lots of Nucs/boxes?
If you can spin a frame and put the stickie back in the hive, why do i see posts of 'i have made x thousand frames'??
Is it an issue of not being able to give the same frames back to the same hives and avoiding any disease spreading?
I only have 3 hives and haven't actually extracted any frames yet, but with a small number i could easily put those frames back into those hives.

I am missing something really basic here, i know it, and that really annoys me!
Thanks

Offline Honeyeater

  • House Bee
  • **
  • Posts: 59
Re: Frame assembly
« Reply #19 on: October 09, 2020, 02:57:20 am »
Hey Ralph. I only have two double brood box hives and will have a maximum of three. I bought a pack of 100 frames because they were a lot cheaper than buying individually but also because these frames fit perfectly in my boxes unlike others I bought previously. Nothing is standard in beekeeping and the previous frames were too short for my boxes so the bees ended with too much space which they filled with burr comb. Now I have a life time stock of frames that fit perfectly.

From next year I do plan on selling some nucs too.