BEEKEEPING LEARNING CENTER > EQUIPMENT USAGE, EXPERIMENTATION, HIVE PLANS, CONSTRUCTION TIPS AND TOOLS

My home made 9 frame radial extractor

(1/2) > >>

Wombat2:
Not one for half measures I decided to make my own 9 frame extractor. My nephew who is a welder of stainless steel made the spinner cage and I made the rest from scrape iron and a sheet of Colorbond.The self draining bottom was fashioned from an old satellite dish.
It is powered by a high torque low RPM drill designed for stirring paint and plaster mixes.

[ You are not allowed to view attachments ][ You are not allowed to view attachments ][ You are not allowed to view attachments ]


And a video of it working
https://youtu.be/u5bm7FmO12U

asprince:
That's a nice piece of work! More pictures?

Thanks for sharing,

Steve

mikecva:
Nice.   :wink: -Mike

biggraham610:
Can I borrow that this weekend?  :grin: Nice. G

BeeMaster2:
Nice job Wombat. I cannot tell but if your drain is pointing down with the drain in the center of the bottom, it will probably work better than my commercial unit.
Ji9

Navigation

[0] Message Index

[#] Next page

Go to full version