Author Topic: What to do about Varroa? (Read 5898 times)

van from Arkansas · « **on:** July 09, 2020, 07:37:18 pm »

I am certain, the opinion of treat or not to treat for Varroa needs to be respected as a high value by each and every beek. Beekeepers are as diverse as the bees we keep.

So your method of dealing with Varroa is of interest to me.
I can see Varroa mites on my bees during inspections. Of course one knows when we see Varroa, the mite load is high. I raise a lot of drones for my queens and drone brood is highly preferred by Varroa so I am not surprised at a high mite load.

Previous years I treated 4 times a year with Oxalic acid, OA, and had excellent winter survival. The problem with OA is the chemical has no effect on Varroa that is safely hidden in capped brood, requiring multiple treatments.

Swarming is an excellent means of reducing Varroa naturally, however I breed against swarming. So the advantage of swarming and reducing mites is not extended to most of my hives.

This year I am contemplating removing all capped brood to a trap hive as I will call it. Then treat the trap hive 2 weeks later after the brood has hatched. A method used across the pond for many years. There are many variations to this method such as caging the queen for 3 weeks then apply a one time treatment as there is no capped brood in the hive for Varroa to hide.

A learned fact is bees live longer IF they do not have to raise brood. So although brood is removed, the remaining bees live longer so there is not the suspected drop in bee numbers while remaining bees are healthier with loss of Varroa due to natural mite drop of 1-2 percent a day. Also fact learned is Varroa change their physiology when there is no capped brood to reproduce in. This change in physiology shuts down reproduction of Varroa and takes time for Varroa to gear up for reproduction once capped brood is available. Simply stated Varroa reproduction is halted without capped brood and takes time for Varroa to gear up reproduction to normal levels. So removing capped brood has several effects other than the obvious mite removal.

Companies such as Bayer have done excellent work developing products, strips, that eliminate Varroa but resistance becomes an issue. I am a bit bias one could say and I prefer Oxalic acid. My reasons are beyond this thread.

How you manage Varroa is of interest to me even if your method is to let alone: natural swarming, splitting are excellent natural means of control. I would enjoy this method but I have only one apiary and going natural and treating in the same apiary appears contradictory.

Ok, I have a high mite load. If I don?t reduce mites before winter bees are developed I will have heavy winter loss. Now, my bees are in a dearth, so a slight drop in numbers equals more honey for the bees this winter. I am soon to remove capped brood to a trap hive, you have thoughts I should know? I am listening.

Cheers

Beeboy01 · « **Reply #1 on:** July 09, 2020, 08:14:10 pm »

I would think that the size of your yard is a factor in what method you decide to use. As everybody knows on this board I use a OAV wand for mite control, my preferred treatment is six or seven doses three days apart. For a large yard this would be time consuming and labor intensive. For a quick mite knock down I will still use Apivar strips but not as frequently as before.
I've never tried brood breaks mainly because I run double deeps and the work load would be more than I would want to take on. From what I understand of brood breaks a second hive needs to be set for each queen isolation and equipment would also be a limiting factor.
If I was operating a large yard my first choice would be something along the lines of a Provap 110.
I was treatment free for almost eight years using survivor hives but found that my genetics ended up with some undesirable africanized traits which included multiple swarming, aggression and very little honey production.

The15thMember · « **Reply #2 on:** July 09, 2020, 09:46:27 pm »

As I've mentioned previously, the only chemical treatment I have ever used is MAQS/FormicPro, which I only use when my mites exceed 3-5% (depending on the season), not on any sort of schedule, and I've been quite happy with it. However, I'd like to find a reliable mechanical treatment, and as such I am also trying the mite trapping this year, a process which I'm actually starting this week. Something else I've been doing is drone trapping. I received a really good tip regarding drone trapping from a friend: she said that if you always have some open drone brood in the hive, then most of the mites will continually be in the drone brood and not in the worker brood. When I uncap the drones, I'm seeing a lot of mites, but my sugar roll numbers have been lower this year than previous years, so it seems to be helping.

Ben Framed · « **Reply #3 on:** July 09, 2020, 09:47:23 pm »

Mr Van, I understand and fully appreciate what you have just said and are asking. Believe me, I am just as concerned about the varroa destructor. We all should be concerned in my opinion. Not only do they suck the critical fat bodies from our bees, fat bodies that are needed for maintaining health of each bee, as well as the colony for survival throughout the winter months, but the varroa destructor distributes viruses that can and WILL devastate and destroy complete colonies. There is more to the varroa destructor than meets the eye.

As you know, I talk to beekeepers all over the world. I seek knowledge of things that I do not know or understand. (And that is a lot of stuff, lol). The one thing that I have found, is the one thing which is frowned upon by my fellow beekeepers here on this forum.

German beekeepers have come up with a solution to the dreaded destructors. An organic solution. This solution seems complicated to the average American Beekeeper because of the process that is required, amounts, conditions, temperatures, etc., necessary to use this effectively and safely for our bees. I have found most beekeepers simply do not wish to go through the trouble of educating themselves, researching the safe and effective use of formic acid.

When I say safe, I am referring to safety to the hive in general and especially the queen. It is not rocket science but apparently viewed as such to most beekeepers here. The dose along with temperature, along with the amount of bees (frames of bees and boxes are part of the mathematics in determining the correct amount of dosage of formic to be administered. It is a balancing act for sure, but a reasonable attack when understood. The formic flash treatment is what I am referring too and what I intend to attempt to master in the near future.

As for now I use Oxalic, I have even went as far as to manufacture a OAV machine which I believe is better than what can be bought in the marketed level for beginners, the one which can be purchased in the 400 to 500 dollar range. I am excluding what pros such as HP use (the pipe type). However pride will not save bees. An effective treatment will. A treatment that WILL effectively kill mites in capped brood as well as uncapped, which is safe to the HEALTHY bees is what is desired by me.

Therefore I say again, I fully intend to go down the formic road in the near future, namely this fall. A mistake? Maybe. A huge mistake? Possibly. We will see. Will I change my mind? I reserve the privilege.

PS you may hear me crying loud and long afterward. Again, we will see. 😁

Blessings

Ben Framed · « **Reply #4 on:** July 09, 2020, 09:55:59 pm »

Let me add. It is wise in my opinion to do what the pros do. I am thinking of HoneyPump namely when I say this. The pros know and have done the hard homework of research, trial and error, and unlike me, cannot afford to make big mistakes. There examples and experience can not be denied in my opinion. I simply just want to try what the pros in Germany do. Again, we will see. Trial and maybe ERROR. 😊

JojoBeeBoy · « **Reply #5 on:** July 09, 2020, 11:02:55 pm »

This is my first year with a real treatment plan. Running 2 apivar strips per hive (most are currently deep over medium, flipped in the next few days. I overfed everything to get some comb built and I'm trying to get old queens moved over into nucs (lot of swarm cells). Probably lost a few queens but every single cell in most hives will have emerged in the next 3-4 days.

I have nucs packed with brood, but the mites in the bigger boxes will have the next week or so to get themselves a good dose of Apivar. I plan to have a strip in every nuc as well. The only exception is one hive of Russian's that is exploding. There are no strips in it and I plan to extract a little sourwood for family and friends.

I may do an OAV while they are this clean, but I think it's probably overkill right now. So, I'm a hobbyist amateur who knows squat, but you asked.

cao · « **Reply #6 on:** July 10, 2020, 12:20:58 am »

Van, it may not help you out any but I don't treat for mites. Haven't since I started keeping bees. I started with 3 nucs and caught a swarm about 7 years ago. Now I have over 80 hives. I guess you could say that my treatment is expansion. Last year was a bad year for winter losses. Lost near 20 of 80+ hives. Still better than the average losses. Previously my winter losses have been around 10%. I don't look for mites so I don't know whether I have them or not. It might not help you out but I thought that I would give my opinion.

TheHoneyPump · « **Reply #7 on:** July 10, 2020, 11:13:45 am »

Formic vapor penetrates the wax/coccoon caps and kills the mites under the caps. This results in bees pulling mite compromised brood shortly after applying. Formic is an excellent go-to when mite loads are super high, out of control. Though it is harsh and using it you may lose Alpha.
OAV on a 4 day regimen for 22 days (28 days if drone brood present), will practically eliminate the entire mite population in the apiary.
ApiVar is also extremely effective, and passive on the part of the beekeeper -set and forget.

In the situation described, what I would do is; hit them with OAV for 2 sets (4d+4d) then sample, alchohol wash. If load is found high and concerning on wash day, then time one more OAV shot and lastly drop in ApiVar strips to mop up.

IMHO

van from Arkansas · « **Reply #8 on:** July 10, 2020, 11:33:58 am »

Oh wow, thanks for all the quick response, everyone.

Up date: scratch the capped brood removal idea. The first 10 frame deep I inspected had 7 frames of capped brood. Well, not a very good idea to remove 70 percent of the frames.

So back to plan that worked in the past: multiple OAV treatments as suggested in this thread. I have a provap 110.

Cheers

Beeboy01 · « **Reply #9 on:** July 10, 2020, 12:27:44 pm »

I'll second HP with two treatments 4 days apart but would think about coming for a third treatment at six days. Back when I did the mite drop count graph I noticed a large increase in the count when I changed the treatment frequency. It might of been a fluke but it has always made me wonder what caused it. Just my thoughts on it for what it's worth.

Van,thanks for bringing up flash formic acid treatment for mites. I did a little research and it looks like a great way to knock down mites in a hive. There are a lot of variables involved but properly applied it may be the answer.

Ben Framed · « **Reply #10 on:** July 10, 2020, 12:34:37 pm »

Quote from: van from Arkansas on July 10, 2020, 11:33:58 am

Oh wow, thanks for all the quick response, everyone.

Up date: scratch the capped brood removal idea. The first 10 frame deep I inspected had 7 frames of capped brood. Well, not a very good idea to remove 70 percent of the frames.

So back to plan that worked in the past: multiple OAV treatments as suggested in this thread. I have a provap 110.

Cheers

Mr Honey Pumps answer is reassuring in every way. Thanks for the topic Mr Van. Good stuff here.

Beeboy01, your experiment was a real eye opener for me. Had we known about the formic flash at that time, and you went that route, I would not have learned what I did from you then. All good stuff.

Ben Framed · « **Reply #11 on:** July 10, 2020, 11:20:35 pm »

Quote from: Beeboy01 on July 10, 2020, 12:27:44 pm

I'll second HP with two treatments 4 days apart but would think about coming for a third treatment at six days. Back when I did the mite drop count graph I noticed a large increase in the count when I changed the treatment frequency. It might of been a fluke but it has always made me wonder what caused it. Just my thoughts on it for what it's worth.

Van,thanks for bringing up flash formic acid treatment for mites. I did a little research and it looks like a great way to knock down mites in a hive. There are a lot of variables involved but properly applied it may be the answer.

From his past post, I do not think Mr Van is a proponent of fromic, nor does he advocate the theory of formic in any fashion unless his views have changed? If you decide to do the fromic flash, you MUST do your homework. Remember, I have not tried it yet myself. I am not recommending it. I just thought some of you might like to see there are options, organic options that are being proved in other parts of the world and slowly catching on in other places. Thus answering Mr Vans Post question.

Now, this fall if all goes well, with all calculations done properly and no mites and plenty of queens afterward, then I may recommend it. 😊 As I stated in another topic. (Mites on Queens?). I am not so sure queens are lost unless they may already be weak and or sick in the first place from mites or the effects of viruses carried by mites; (as there are more than one). If viruses are not enough, I will again mention the effects of mites sucking the fat bodies from the host bees. Queens are not excluded. (BUMMER). If this is the case, if she is already effected, do we really need that really weak queen anyway?

Just food for thought, how many times have each of you, who have had a mite infested hive, can honestly say the queen of that hive was a barn burner layer to the very end? (She may have been sick!) If so she needs to go anyway. In my opinion.

Phillip

.

van from Arkansas · « **Reply #12 on:** July 11, 2020, 09:51:12 am »

Good morning Mr. Ben. I have no problem with Formic, a fantastic organic acid that kills mites in the capped brood cell. I just personally prefer Oxalic even though Oxalic does not kill mites in capped brood. Just a personal preference I have, a bias. Either acid works well.

I have been injected with Formic acid so many times by fire ants, I have a personal dislike of Formic but I do not mind one bit if a beek chooses to use Formic, Formic works fine, just make sure to use under 90F.

Ben Framed · « **Reply #13 on:** July 11, 2020, 09:58:19 am »

Quote from: van from Arkansas on July 11, 2020, 09:51:12 am

Good morning Mr. Ben. I have no problem with Formic, a fantastic organic acid that kills mites in the capped brood cell. I just personally prefer Oxalic even though Oxalic does not kill mites in capped brood. Just a personal preference I have, a bias. Either acid works well.

I have been injected with Formic acid so many times by fire ants, I have a personal dislike of Formic but I do not mind one bit if a beek chooses to use Formic, Formic works fine, just make sure to use under 90F.

Thank you Mr Van. I know exactly what you mean about the fire ants! We have those also. lol Goodness! Actually formic (flash) is not to be used over 80, In my opinion from what I have found 80 may be pushing it. How are things going with you grafting? I always enjoy hearing your updates as I am sure others here do also. Exciting for sure! Blessings to you Mr. Van

van from Arkansas · « **Reply #14 on:** July 11, 2020, 10:07:31 am »

I have about 20 grafted larva as of yesterday, Friday, in 4 different hives. Only 5 grafts per hive as we are in a dearth so food is scarce.

I would like to know how long Oxalic acid is effective at killing mites in a hive? HP stated 4 day intervals, this is what I?ll go with? This is all I have to go on. I have never read a study regarding longevity of Oxalic acid. Would like to know about Formic acid also: how many days remains effective in a hive? Anybody know how long either of these acids kill mites in a hive?

Ben Framed · « **Reply #15 on:** July 11, 2020, 10:58:53 am »

Quote from: van from Arkansas on July 11, 2020, 10:07:31 am

I have about 20 grafted larva as of yesterday, Friday, in 4 different hives. Only 5 grafts per hive as we are in a dearth so food is scarce.

I would like to know how long Oxalic acid is effective at killing mites in a hive? HP stated 4 day intervals, this is what I?ll go with? This is all I have to go on. I have never read a study regarding longevity of Oxalic acid. Would like to know about Formic acid also: how many days remains effective in a hive? Anybody know how long either of these acids kill mites in a hive?

Mr Van, the formic flash is an one day treatment. Supposedly killing the mites external of the brood as well as internal which are already capped in the brood. I have talked to many people from many places, taken notes but I confess, I an by not wise an expert, nor do I claim to be. I am simply noting what the experts say. The University of West Virginia here in America is a good place to start. Now again I am referring to the formic flash method. There are other ways of using formic, even the commercially available strips that our one 15thMember has successfully used. However strict directions must be followed.

Some calim that once a year is all that is needed with the formic flash. Germany is the place that seems to be really up on the flash treatment method. It will will take some research for a person to understand the formic flash in my opinion. I am hopeful, in my case, the rewards will be worth the effort of time spent in research.

Blessings

Beeboy01 · « **Reply #16 on:** July 11, 2020, 11:22:26 am »

Van, When I did the mite drop count study my final "most effective days between treatment interval" was determined when the count decreased to 50% of the first day count. It was a rough lethal dose 50 and indicated to me that the effects of the OAV had diminished past a decent kill rate. It's not very scientific and there were variables not taken into my study. Every four days would be sufficient in my opinion.
As to how long the oxalic acid micro crystals last in a hive post treatment I've read anywhere from less than a day up to a full week. Since as bee keepers we are mainly interested in the mite lethal dose level of the micro crystals in the hive I will fall back on to my mite drop study as sketchy as it is.
I haven't seen any larger study or research that parallels what I did. A larger study would in my opinion be of great service to the bee keeping world. I'm not trying to blow my own horn, just trying to add to the information out there so it can be built on by others in our war against Varroa. As a hobbyist bee keeper I feel like I'm a student trying to teach a master by give you advice. LOL

beesonhay465 · « **Reply #17 on:** July 11, 2020, 12:53:54 pm »

one year beekeeper i use the blue shop towel saturated with oxalic acid dissolved in glycerin . the treatment is supposed to last about a month. as the towel is chewed up and removed. i treated 3 times in the fall about 30 days apart.

LawyerRick · « **Reply #18 on:** July 11, 2020, 02:30:22 pm »

Been keeping bees over 10 years & use OA, glycerin & water in thin cellulose sponges. Lasts over a month & the slow release of OA does the job. Lowers my levels down to 1or 2 per 300 bees. Cheap, easy to use & doesn't depend on temperature. Used formic pro 2 years ago & lost 3 queens.

rober · « **Reply #19 on:** July 12, 2020, 12:29:14 am »

I used to install drop boards to test & treat hives with high counts & not treat those with low counts. when dead-outs from low count hives were sent to usda lab they had high mite counts. so mite counts can change quickly. so now I don't test & treat all hives in august with apiguard. & use O.A. in mid November & mid march when there's not much brood. seems to be working as i've seen 10% losses for the last 3 winters. the one year I used MAQS I lost half my queens. MAQS say the formula has been changed to correct that but once burned...

Ben Framed · « **Reply #20 on:** July 12, 2020, 02:40:49 am »

Quote from: LawyerRick on July 11, 2020, 02:30:22 pm

Been keeping bees over 10 years & use OA, glycerin & water in thin cellulose sponges. Lasts over a month & the slow release of OA does the job. Lowers my levels down to 1or 2 per 300 bees. Cheap, easy to use & doesn't depend on temperature. Used formic pro 2 years ago & lost 3 queens.

Lawyer Rick, will you go into detail as to how you prepare and use this method? 1 or 2 per 300 sounds grand to me. Thanks.

van from Arkansas · « **Reply #21 on:** July 12, 2020, 04:40:14 pm »

Quote from: cao on July 10, 2020, 12:20:58 am

Van, it may not help you out any but I don't treat for mites. Haven't since I started keeping bees. I started with 3 nucs and caught a swarm about 7 years ago. Now I have over 80 hives. I guess you could say that my treatment is expansion. Last year was a bad year for winter losses. Lost near 20 of 80+ hives. Still better than the average losses. Previously my winter losses have been around 10%. I don't look for mites so I don't know whether I have them or not. It might not help you out but I thought that I would give my opinion.

Thank you Cao, yes, does help. Splits are a great tool, expansion, for controlling varroa. What ever works. I admire treatment free beeks.

van from Arkansas · « **Reply #22 on:** July 12, 2020, 04:45:50 pm »

Quote from: LawyerRick on July 11, 2020, 02:30:22 pm

Been keeping bees over 10 years & use OA, glycerin & water in thin cellulose sponges. Lasts over a month & the slow release of OA does the job. Lowers my levels down to 1or 2 per 300 bees. Cheap, easy to use & doesn't depend on temperature. Used formic pro 2 years ago & lost 3 queens.

Lawyer Rick: same ? as Mr. BenFramed ask?

rast · « **Reply #23 on:** July 13, 2020, 08:30:46 pm »

I also am interested in Lawer Rick's method. As a maker of OAV guns that is what I use of course. Its also interesting that using OAV in this heat that the bees seem to become very hygenic and will pull the eggs and young larva out. This of course results in a lowering of brood population which also helps with mite control. Double edge sword though for those maintaining population for brazilian pepper. U of F called my attention to the brood loss in the summer heat after OAV and I confirmed on my hives.

jimineycricket · « **Reply #24 on:** July 14, 2020, 10:31:54 am »

Just kind of curious. When was this extended shop towel with oxalic acid method legalized??

amymcg · « **Reply #25 on:** July 14, 2020, 10:47:26 am »

I do not believe this is a registered form of treatment. From what I could glean, Randy has a special permit for experimental usage.

Ben Framed · « **Reply #26 on:** July 14, 2020, 10:49:02 am »

Quote from: jimineycricket on July 14, 2020, 10:31:54 am

Just kind of curious. When was this extended shop towel with oxalic acid method legalized??

Just kind of curious why was it made illegal in the first place? If it was?

Ben Framed · « **Reply #27 on:** July 16, 2020, 12:39:20 pm »

Quote from: rast on July 13, 2020, 08:30:46 pm

I also am interested in Lawer Rick's method. As a maker of OAV guns that is what I use of course. Its also interesting that using OAV in this heat that the bees seem to become very hygenic and will pull the eggs and young larva out. This of course results in a lowering of brood population which also helps with mite control. Double edge sword though for those maintaining population for brazilian pepper. U of F called my attention to the brood loss in the summer heat after OAV and I confirmed on my hives.

Quote from: van from Arkansas on July 12, 2020, 04:45:50 pm

Quote from: LawyerRick on July 11, 2020, 02:30:22 pm
Been keeping bees over 10 years & use OA, glycerin & water in thin cellulose sponges. Lasts over a month & the slow release of OA does the job. Lowers my levels down to 1or 2 per 300 bees. Cheap, easy to use & doesn't depend on temperature. Used formic pro 2 years ago & lost 3 queens.

Lawyer Rick: same ? as Mr. BenFramed ask?

Quote from: Ben Framed on July 12, 2020, 02:40:49 am

Quote from: LawyerRick on July 11, 2020, 02:30:22 pm
Been keeping bees over 10 years & use OA, glycerin & water in thin cellulose sponges. Lasts over a month & the slow release of OA does the job. Lowers my levels down to 1or 2 per 300 bees. Cheap, easy to use & doesn't depend on temperature. Used formic pro 2 years ago & lost 3 queens.

Lawyer Rick, will you go into detail as to how you prepare and use this method? 1 or 2 per 300 sounds grand to me. Thanks.

Bump

Michael Bush · « **Reply #28 on:** July 19, 2020, 03:20:28 pm »

I run about 20% drone comb and I never cull drone comb. I just move it to the outside frames. I have a lot of combs that are entirely drone comb. My Varroa counts are never high. All my comb is either natural size or small cell.

yes2matt · « **Reply #29 on:** July 22, 2020, 11:52:58 am »

Quote from: Michael Bush on July 19, 2020, 03:20:28 pm

I run about 20% drone comb and I never cull drone comb. I just move it to the outside frames. I have a lot of combs that are entirely drone comb. My Varroa counts are never high. All my comb is either natural size or small cell.

How often do you test? Every year I vow to test regularly and every year I test less.

For varroa treatment I make a lot of splits after honey harvest (mid-late June) and try my best to raise next year's queens from my healthiest-this-year hive. Every colony gets cut down at least once. I have to feed like crazy to get them ready for November but they dont raise many drones when they're building back and I haven't needed to use miticides.

Sent from my SM-J737P using Tapatalk

Ben Framed · « **Reply #30 on:** July 22, 2020, 12:02:04 pm »

Matt have you investigated the topic New anti Varroa Treatment. Started By Bobbee? If not is describes a mushroom that is anti termite. It is hoped it will have the same effect on mites while not effecting bees 🐝 I looked at the date on the video posted is was 2014 so it is not so new really. The question is what has been found. Anyone here know of this mushroom treatment? I did see a heading by Kamon Reynolds that mentioned this but I have not watched the video. (Yet)

Ben Framed · « **Reply #31 on:** July 22, 2020, 12:07:09 pm »

I would also like to encourage you to read the article posted by TheHoneyPump on his topic : Interesting tiny critters.

Michael Bush · « **Reply #32 on:** August 05, 2020, 12:09:25 pm »

>How often do you test? Every year I vow to test regularly and every year I test less.

I don't test. The bee inspector who inspects for my health certificate so I can sell queens does once a year...

Ben Framed · « **Reply #33 on:** August 07, 2020, 12:39:33 pm »

Quote from: LawyerRick on July 11, 2020, 02:30:22 pm

Been keeping bees over 10 years & use OA, glycerin & water in thin cellulose sponges. Lasts over a month & the slow release of OA does the job. Lowers my levels down to 1or 2 per 300 bees. Cheap, easy to use & doesn't depend on temperature. Used formic pro 2 years ago & lost 3 queens.

Lawyer Rick can you post the address to this method? I can not find. Thanks Sir.

amymcg · « **Reply #34 on:** August 09, 2020, 11:35:41 am »

It?s outlined quite extensively on scientificbeekeeping.com read all the articles, it?s several years in the making. It is also not an epa approved method.

Sent from my iPhone using Tapatalk

Ben Framed · « **Reply #35 on:** August 09, 2020, 11:42:37 am »

Thanks Amy. I have found most everything including shop towels, OAV, Formic, Apivar, etc. by Mr Oliver, except the sponge method.

amymcg · « **Reply #36 on:** August 09, 2020, 12:36:54 pm »

Ben, it is a bit hidden, but here?s a link directly to the sponge. http://scientificbeekeeping.com/extended-release-oxalic-acid-progress-report-2019/#_Toc25995005

Sent from my iPhone using Tapatalk

Ben Framed · « **Reply #37 on:** August 09, 2020, 12:40:35 pm »

Got it! Thanks Amy!

Ben Framed · « **Reply #38 on:** August 09, 2020, 01:03:54 pm »

I would think 98 percent efficiency against Varroa Destructor would be good anytime. Randy is suggesting this is safely achievable, even during honey production. If I am understanding him correctly?

"Practical application: in our commercial operation, achieving 98% efficacy in preventing mite counts from building up during the honey flow makes us very happy. And this for a treatment that is very safe to handle, takes seconds to apply, and does not contaminate the honey or beeswax. The cost would be about 32? per dose via shop towel (not counting the labor involved in preparation), or $1.30 with the cellulose sponges (which are easier to prepare and apply). In case you haven?t guessed by now, I?m pretty excited about this method, but feel that we have at least another year of testing before we?re ready to submit to EPA."

Ben Framed · « **Reply #39 on:** August 09, 2020, 01:12:49 pm »

Is this the sponge 🧽?

https://www.amazon.com/cce-Dishcloth-Cellulose-Eco-Friendly-Absorbent/dp/B087N971DQ

Ben Framed · « **Reply #40 on:** February 27, 2022, 11:24:14 pm »

This was an interesting topic Posted by: Van from Arkansas. I have a little something I would like to add to it today. I received the following message just today from a beekeeper from the Netherlands. We had both posted questions and suggestions on the latest Bob Binnie video comments concerning varroa mite treatment and the research being done via Mr Binnies' concern. I have studied several methods of Formic treatment and the one day Formic Flash Treatment has been the most appealing to me thus far when considering formic.

I am adding Rogier Dikkes of Netherlands reply to me, for your 'possible interest'. His method of formic flash is a 4 day cycle not a one day cycle.

From Rogier Dikkes of Netherlands.
"I use formic flash every summer after taking off the supers. It is very restricted in how to use it. Also we use different hives here in our area (simplex size). Also in our area (Netherlands) it is very common to use a varroa plank under the hive. Usually we leave this plank under the bottom to count mites, but I also use it to place the cleaning pads on them. All values I will now mention are in metric system.

From the supermarket I buy cleaning pads, their size is 20x20x.5cm. I drip 85% formic acid 10ml per box on them (we use double brood boxes by default because our simplex box sizes are smaller, so 2 boxes =20ml). Then I leave this pad there for 4 days. After 4 days you can repeat this treatment for 4 more rounds. I usually only do 2 because of the weather.

When temperature is too low or high (18-25c) you cannot treat. Too high: hives get killed, too low and no effect. Also humidity plays an important role. Last year I treated during a rainy period, I saw no notable mite drops and still saw DFW / mites on bees. Years before I saw drops of hundreds of mites.

If you use too much acid (once gave 30ml to a double box) the bees will panic and run out of the box. I'm pretty sure I lose 1 queen due to this. But in general queens stay laying and alive if you follow the guidelines.

I also have used Liebig dispensers, but I absolutely hate them. They released formic slowly, but after the treatment period I took them off and they were still dripping some residue in the box, on bees and on my clothes which were ruined since it burns holes right away. It is very scary stuff and if used improperly you can cause explosions, acid burns and breathing issues. It is however the most effective treatment when all parameters are right. But it leaves for such a short moment a year it is not the easiest way to treat.

Oh and before I forget: I always cool my formic acid in a freezer before opening it. This stuff at room temperature can knock you down if you do are not careful."