Welcome, Guest

Author Topic: GEAR PUMP  (Read 8418 times)

Offline BeeTeach

  • New Bee
  • *
  • Posts: 7
  • Gender: Male
GEAR PUMP
« on: January 25, 2009, 05:33:03 pm »
If someone has built their own gear pump system could you please give me some advice? I have motors and plates but the actual pump seems to be elusive. Is there a model number of the Moyno or similar manufacturers pump that is standard? Can you buy the parts to build them? Through what source can you buy a pump direct from the manufacturer? Are there used or rebuilt suppliers? I know these are available through the beekeeping suppliers.I'm trying to build this as economical as possible.

Offline rdy-b

  • Super Bee
  • *****
  • Posts: 2286
Re: GEAR PUMP
« Reply #1 on: January 25, 2009, 10:05:57 pm »
Dont use anything less than -N9000-try to get 1 1/2-(inch and a half) ports -the N900 is standard one inch honey pump  8-)
http://www.oberdorfer-pumps.com/
http://www.oberdorfer-pumps.com/Spec_sheets/N9000updated.pdf  RDY-B

Offline BeeTeach

  • New Bee
  • *
  • Posts: 7
  • Gender: Male
Re: GEAR PUMP
« Reply #2 on: January 27, 2009, 12:31:01 am »
Thanks RDY-B! A good place to start. I would still appreciate any input on other manufacturers and ideas.

Offline rdy-b

  • Super Bee
  • *****
  • Posts: 2286
Re: GEAR PUMP
« Reply #3 on: January 27, 2009, 10:00:34 pm »
what kind of system are you thinking about -there is also worm drive units -depends on aplication-whats the set up-
 :) RDY-B

Offline BeeTeach

  • New Bee
  • *
  • Posts: 7
  • Gender: Male
Re: GEAR PUMP
« Reply #4 on: January 27, 2009, 11:52:14 pm »
I'm winging it at this point. From my 20 frame extractor into a 12 gallon sump. I need the pump to to take honey from the sump to a 25 gallon bottling tank or storage tanks. Who makes the worm pumps? I try to buy used or build my own. A local retired beek told me that he used to use a perforated section of pipe wrapped in nylons at the end of the fill pipe coming from the pump to filter. Any suggestions here? 

Offline asprince

  • Super Bee
  • *****
  • Posts: 1743
  • Gender: Male
Re: GEAR PUMP
« Reply #5 on: January 28, 2009, 01:47:24 pm »
I have a gear pump that I made by modifying an oil pump from a small block chevy. I have never used it for honey but I see no reason why it won't work. I run my diesel trucks on waste vegetable oil and use this pump to move the oil. In the winter, the oil can be quite thick......like honey. PM me if you are interested and I will send you the link that I used for instructions.

Steve 
Politics is supposed to be the second oldest profession. I have come to realize that it bears a very close resembalance to the first. - Ronald Reagan

Offline BeeTeach

  • New Bee
  • *
  • Posts: 7
  • Gender: Male
Re: GEAR PUMP
« Reply #6 on: January 28, 2009, 07:18:41 pm »
Steve, PM'd you to see if we can come up with something food grade. Thanks!

Offline asprince

  • Super Bee
  • *****
  • Posts: 1743
  • Gender: Male
Re: GEAR PUMP
« Reply #7 on: January 28, 2009, 07:25:46 pm »
I sent you a PM. Did you receive it?

Steve
Politics is supposed to be the second oldest profession. I have come to realize that it bears a very close resembalance to the first. - Ronald Reagan

Offline BeeTeach

  • New Bee
  • *
  • Posts: 7
  • Gender: Male
Re: GEAR PUMP
« Reply #8 on: January 29, 2009, 11:18:47 am »
Got it Steve. Pretty cool. I see these pop up on Ebay now and then. Maybe an after market SS unit would qualify as food grade? Thanks!

Offline BMAC

  • Field Bee
  • ***
  • Posts: 615
    • http://WWW.OLEMCDONALD.COM
Re: GEAR PUMP
« Reply #9 on: January 29, 2009, 02:17:17 pm »
Dont use anything less than -N9000-try to get 1 1/2-(inch and a half) ports -the N900 is standard one inch honey pump  8-)
http://www.oberdorfer-pumps.com/
http://www.oberdorfer-pumps.com/Spec_sheets/N9000updated.pdf  RDY-B


RDY-B  Have you built one with this bronze pump???

I bought one of these new on ebay and planned to use it for syrup as opposed to honey.  No worries about leaching lead and darkening the honey from the bronze?

God Bless all the troops
Semper Fi Marines!

Offline rdy-b

  • Super Bee
  • *****
  • Posts: 2286
Re: GEAR PUMP
« Reply #10 on: January 29, 2009, 10:48:24 pm »
That is the number from my honey pump which i bought from mannlake-no worries-like i mentioned dont go under one inch -I warm my honey in a jacketed sump direct from extractor-to 90-degrees-i also had my motor which is 3/4 horse wired for 220 that made a big difference on pumping honey that wasn't Hoter than i preferred-for syrup i sopose a gas engine would be dandy for feeding  :lol: RDY-B

Offline BMAC

  • Field Bee
  • ***
  • Posts: 615
    • http://WWW.OLEMCDONALD.COM
Re: GEAR PUMP
« Reply #11 on: January 30, 2009, 08:50:13 am »
very Excellent.  The pump I bought is 1.5 inch in and out.  I was going to have to neck it down for syrup. 

I considered its use in the honey house, but was not sure.  Now I am.  Thanks.  I appreciate it.  I think I bought the pump itself for 60 bucks on ebay a year or two ago..  Prolly couldnt find it for that price now. 

I do have an old terrible woodsman honey pump I can use for syrup pumping and yep.  I am about to tear apart an old rototiller cause it has a horizontal shaft and build up the syrup pump...  The woodsman kicks out black gunk into syrup so I think that pump is spent, but good for syrup.....
God Bless all the troops
Semper Fi Marines!