Beemaster's International Beekeeping Forum

BEEKEEPING LEARNING CENTER => THE TRADING POST => Topic started by: The Bix on March 08, 2011, 08:48:25 pm

Title: 8 - Frame Radial Honey Extractor - Colorado
Post by: The Bix on March 08, 2011, 08:48:25 pm

This extractor will spin 8 medium or shallow frames radially. Spin them once and your done! No flipping the frames around to extract the other side. It will spin deep frames too, but those have to be done four at a time and tangentially (flipping required). The extractor was built in August and used for three different extracting sessions so far. The unit is powered by a 1/2" corded electric drill (seen in picture but not included). It was tested and works fine with a cordless drill or a 3/8" drill also. Come and see it.

All plastic parts are made from either HDPE or UHMW (both food safe).
All metal parts are stainless steel.
Container is food safe plastic also.
Honey gate included and installed.

(http://img690.imageshack.us/img690/4247/dscf6196q.jpg) (http://img690.imageshack.us/i/dscf6196q.jpg/)

(http://img607.imageshack.us/img607/8964/dscf6199.jpg) (http://img607.imageshack.us/i/dscf6199.jpg/)

Title: Re: 8 - Frame Radial Honey Extractor - Colorado
Post by: phil c on March 09, 2011, 11:29:57 am

Price? Shipping oversize?

Title: Re: 8 - Frame Radial Honey Extractor - Colorado
Post by: jason.mcewan on June 04, 2011, 06:44:33 pm

Is this still available? I would love some details.

Title: Re: 8 - Frame Radial Honey Extractor - Colorado
Post by: John Pfaff on July 03, 2011, 09:34:27 am

Make me ont for radial deeps and we will talk - I will probably buy.
Thanks,
John. :delivery:

Title: Re: 8 - Frame Radial Honey Extractor - Colorado
Post by: alexlloyd on September 25, 2011, 10:47:44 pm

Count me in for a radial deep spinner too....

Title: Re: 8 - Frame Radial Honey Extractor - Colorado
Post by: bobster on February 13, 2015, 12:23:03 am

Can anyone help me to get info on where I can buy this 8 frame radiaal honey extractor - colorado

Title: Re: 8 - Frame Radial Honey Extractor - Colorado
Post by: buzzbee on February 14, 2015, 07:01:03 am

Bobster,
this is an old post and may well have been sold long ago. You could click on the posters name(The Bix) and another window will open with the option to send a PM(private message).
http://www.beemaster.com/forum/index.php?action=pm;sa=send;u=6424
Or click on this link and the pm window will open for you.

Title: Re: 8 - Frame Radial Honey Extractor - Colorado
Post by: Joe D on February 18, 2015, 12:00:17 am

The Bix sold a set of the internal parts to a fellow in Ga.  I bought them from him.  Did some modifying to the top frame holder, had a new longer shaft made, and incorporated a treadmill motor with speed controls.  If I were to modify again would move motor to underneath instead of on top.  It does work fine.  Here is  some pic of mine, didn't find pic with motor. (http://)   The Bix may still have one.


Joe

pics didn't show.