Welcome, Guest

Author Topic: 8 - Frame Radial Honey Extractor - Colorado  (Read 19170 times)

Offline The Bix

  • House Bee
  • **
  • Posts: 427
  • Gender: Male
8 - Frame Radial Honey Extractor - Colorado
« on: March 08, 2011, 08:48:25 pm »
This extractor will spin 8 medium or shallow frames radially. Spin them once and your done! No flipping the frames around to extract the other side. It will spin deep frames too, but those have to be done four at a time and tangentially (flipping required). The extractor was built in August and used for three different extracting sessions so far. The unit is powered by a 1/2" corded electric drill (seen in picture but not included). It was tested and works fine with a cordless drill or a 3/8" drill also. Come and see it.

All plastic parts are made from either HDPE or UHMW (both food safe).
All metal parts are stainless steel.
Container is food safe plastic also.
Honey gate included and installed.





Offline phil c

  • House Bee
  • **
  • Posts: 60
  • Gender: Male
Re: 8 - Frame Radial Honey Extractor - Colorado
« Reply #1 on: March 09, 2011, 11:29:57 am »
Price? Shipping oversize?
AMC cars, Jeeps, Mineapolis Moline Tractors, Bees, More stuff than I have time to play with

Offline jason.mcewan

  • New Bee
  • *
  • Posts: 5
  • Gender: Male
Re: 8 - Frame Radial Honey Extractor - Colorado
« Reply #2 on: June 04, 2011, 06:44:33 pm »
Is this still available? I would love some details.

Offline John Pfaff

  • House Bee
  • **
  • Posts: 78
  • Gender: Male
    • HughesNet
Re: 8 - Frame Radial Honey Extractor - Colorado
« Reply #3 on: July 03, 2011, 09:34:27 am »
Make me ont for radial deeps and we will talk - I will probably buy.
Thanks,
John. :delivery:

Offline alexlloyd

  • New Bee
  • *
  • Posts: 4
Re: 8 - Frame Radial Honey Extractor - Colorado
« Reply #4 on: September 25, 2011, 10:47:44 pm »
Count me in for a radial deep spinner too....

Offline bobster

  • Brood
  • Posts: 2
Re: 8 - Frame Radial Honey Extractor - Colorado
« Reply #5 on: February 13, 2015, 12:23:03 am »
Can anyone help me to get info on where I can buy this 8 frame radiaal honey extractor - colorado

Offline buzzbee

  • Ken
  • Global Moderator
  • Galactic Bee
  • *******
  • Posts: 5930
  • Gender: Male
    • N Central Pa Beekeepers Facebook Page
Re: 8 - Frame Radial Honey Extractor - Colorado
« Reply #6 on: February 14, 2015, 07:01:03 am »
Bobster,
this is an old post and may well have been sold long ago. You could click on the posters name(The Bix) and another window will open with the option to send a PM(private message).
http://www.beemaster.com/forum/index.php?action=pm;sa=send;u=6424
Or click on this link and the pm window will open for you.

Offline Joe D

  • Super Bee
  • *****
  • Posts: 2246
  • Gender: Male
Re: 8 - Frame Radial Honey Extractor - Colorado
« Reply #7 on: February 18, 2015, 12:00:17 am »
The Bix sold a set of the internal parts to a fellow in Ga.  I bought them from him.  Did some modifying to the top frame holder, had a new longer shaft made, and incorporated a treadmill motor with speed controls.  If I were to modify again would move motor to underneath instead of on top.  It does work fine.  Here is  some pic of mine, didn't find pic with motor.    The Bix may still have one.


Joe

pics didn't show.