Welcome, Guest

Author Topic: Making frames for Layens hives.  (Read 3184 times)

Offline Bob Wilson

  • Queen Bee
  • ****
  • Posts: 1109
  • Gender: Male
Making frames for Layens hives.
« on: October 21, 2023, 06:15:19 pm »
All you Layens hives beeks out there.
I'm making some frames.
1. Some plans call for 1 1/8 inch thick bars and some for 1 1/2 inch. What do you all use?
2. How many of you have solid touching bars and how many keep a gap (like langstroth frames) and cover with a cloth?

Offline Bob Wilson

  • Queen Bee
  • ****
  • Posts: 1109
  • Gender: Male
Re: Making frames for Layens hives.
« Reply #1 on: October 31, 2023, 10:56:48 am »
After doing some research, I am going with 1 1/2 inch wide frames.
I will make them straight, so they touch with no gap, like the langstroth frames have.

Offline Occam

  • House Bee
  • **
  • Posts: 319
  • Gender: Male
Re: Making frames for Layens hives.
« Reply #2 on: November 04, 2023, 12:46:23 am »
In my experimental log hive I made my frames straight so they touched and had no issues due to that. They were no harder to remove than regular frames.
Entities must not be multiplied beyond necessity

Offline Bob Wilson

  • Queen Bee
  • ****
  • Posts: 1109
  • Gender: Male
Re: Making frames for Layens hives.
« Reply #3 on: November 04, 2023, 02:57:58 pm »
I found that too, Occam. I like how it keeps the brood sealed, but they are harder to separate. The reason behind it, as I understand, is that gaps are not needed because the hive is not vertical, and the bees don't need to pass upward into another box.
I know some beeks use frames with a gap in between, like langstroth, but then they lay a cloth square over the top on the hive, which can be peeled back as needed to expose frames.

Offline Michael Bush

  • Universal Bee
  • *******
  • Posts: 19934
  • Gender: Male
    • bushfarms.com
Re: Making frames for Layens hives.
« Reply #4 on: November 06, 2023, 07:17:22 am »
I would do 1-1/8".  That's what the bees want in the brood nest and they can cover twice as much brood at 1-1/8" rather than 1-1/2".  Ideally I find 1-1/8" in the brood nest and 1-1/2" where the honey is works the best as that's what the bees want to build.
My website:  bushfarms.com/bees.htm en espanol: bushfarms.com/es_bees.htm  auf deutsche: bushfarms.com/de_bees.htm  em portugues:  bushfarms.com/pt_bees.htm
My book:  ThePracticalBeekeeper.com
-------------------
"Everything works if you let it."--James "Big Boy" Medlin

Offline Occam

  • House Bee
  • **
  • Posts: 319
  • Gender: Male
Re: Making frames for Layens hives.
« Reply #5 on: November 06, 2023, 10:06:12 pm »
How many frames are in your layers hive Bob? I really like the idea of a layers hove but had decided earlier this year to go with a horizontal using deep frames since I also have langs. I wanted to simplify my equipment and be able to use my frames universally if I needed to swap a frame of brood over in an emergency situation or some other situation.
Entities must not be multiplied beyond necessity

Offline Bob Wilson

  • Queen Bee
  • ****
  • Posts: 1109
  • Gender: Male
Re: Making frames for Layens hives.
« Reply #6 on: November 08, 2023, 11:16:46 pm »
Michael. I was hoping to keep only one size frame. That way I can migrate brood frames to the back to be filled with honey. I was thinking of 1 1/2 inch, but now you make me question the choice.

Occam. I hope to build the hives this weekend. 4 feet long. About 28 frames.
I am stopping use of horizontal hives with deep frames. I found that the bees pulled the brood nest through 19-20 frames of a 30 deep frames hive, and the bees had difficulty storing nectar and capping honey in just the 10 remaining frames. Layens hives have deeper frames (although more narrow) but there is more comb area overall. I like the deeper frames.

Offline Michael Bush

  • Universal Bee
  • *******
  • Posts: 19934
  • Gender: Male
    • bushfarms.com
Re: Making frames for Layens hives.
« Reply #7 on: November 09, 2023, 11:12:44 am »
If I were doing one size I would do 1-1/8".  But I think you'll be happier with what they do with 1-1/8" and 1-1/2"
« Last Edit: November 13, 2023, 07:08:27 am by Michael Bush »
My website:  bushfarms.com/bees.htm en espanol: bushfarms.com/es_bees.htm  auf deutsche: bushfarms.com/de_bees.htm  em portugues:  bushfarms.com/pt_bees.htm
My book:  ThePracticalBeekeeper.com
-------------------
"Everything works if you let it."--James "Big Boy" Medlin

Offline Occam

  • House Bee
  • **
  • Posts: 319
  • Gender: Male
Re: Making frames for Layens hives.
« Reply #8 on: November 10, 2023, 04:23:32 pm »
I wonder what the weight difference is between the two frame sizes when fully capped.
Entities must not be multiplied beyond necessity

Offline Bob Wilson

  • Queen Bee
  • ****
  • Posts: 1109
  • Gender: Male
Re: Making frames for Layens hives.
« Reply #9 on: November 10, 2023, 11:43:36 pm »
My first built Layens frame. They are way too expensive to buy, so I am sawing lumber, and making them from scratch.
Thanks for the advice.

Online Ben Framed

  • Global Moderator
  • Universal Bee
  • *******
  • Posts: 12711
  • Mississippi Zone 7
Re: Making frames for Layens hives.
« Reply #10 on: November 14, 2023, 09:31:59 am »
Looks good Bob..
2 Chronicles 7:14
14 If my people, which are called by my name, shall humble themselves, and pray, and seek my face, and turn from their wicked ways; then will I hear from heaven, and will forgive their sin, and will heal their land.

Offline Bob Wilson

  • Queen Bee
  • ****
  • Posts: 1109
  • Gender: Male
Re: Making frames for Layens hives.
« Reply #11 on: November 14, 2023, 06:53:11 pm »
Occam,
Add two pounds from a medium, two more to a deep, and two more to a Layens.
So a Layens is about 10-12 lbs.

 

anything