BEEKEEPING LEARNING CENTER > EQUIPMENT USAGE, EXPERIMENTATION, HIVE PLANS, CONSTRUCTION TIPS AND TOOLS
My home made 9 frame radial extractor
Wombat2:
Not one for half measures I decided to make my own 9 frame extractor. My nephew who is a welder of stainless steel made the spinner cage and I made the rest from scrape iron and a sheet of Colorbond.The self draining bottom was fashioned from an old satellite dish.
It is powered by a high torque low RPM drill designed for stirring paint and plaster mixes.
And a video of it working
https://youtu.be/u5bm7FmO12U
asprince:
That's a nice piece of work! More pictures?
Thanks for sharing,
Steve
mikecva:
Nice. :wink: -Mike
biggraham610:
Can I borrow that this weekend? :grin: Nice. G
BeeMaster2:
Nice job Wombat. I cannot tell but if your drain is pointing down with the drain in the center of the bottom, it will probably work better than my commercial unit.
Ji9
Navigation
[0] Message Index
[#] Next page
Go to full version